Rubber, Latex & Tyre

Advanced Characterization of Polymers & Rubber Compounds by Static & Dynamic Testing
Sponsor:
CG Engineering Ltd., Thailand
MonTech Rubber Testing Solutions, Germany
Speaker:

Ralf Baeuerlein, MonTech Rubber Testing Solutions, Germany

Registration Fee: Individual: 25 US$
Group (5 Pax): 100 US$
Language: English
Time Length: ~90 Min
To Register: Registration Form
[More]
Description: Static and dynamic rheological properties are well known and used in research and development. Due to new formulations as well as new filler systems dynamic characterization of rubber compounds and materials also becomes a necessity for factory and production quality control laboratories. International standards have set benchmarks for several applications as well as industry standards are complementing this development. Learn about latest trends and topics for the application of statics and dynamic rheological testing solutions in quality control laboratories as well as directly on the shopfloor including a full integration into the factory workflow and mixing process.

Rubber Chemicals to Improve Tire Balancing Performance and Appearance
Sponsor:
Qingdao Fihonor Chemical Science & Technology Co.,Ltd., China
Speaker:

Tianhua Xu, Fin International (Thailand) Co., Ltd

Registration Fee: Individual: 25 US$
Group (5 Pax): 100 US$
Language: English
Time Length: ~60 Min
To Register: Registration Form
[More]
Description: This webinar is focusing on latest technical developments related to rubber chemicals used in tire industries. This presentation will cover chemical technology, which improves tire balancing performance and its appearance. This technology is developed by Qingdao Fihonor Chemical Science & Technology Co.,Ltd, China

Reduce Cycle Time and Eliminate Defects in an Over-Molding Rubber Product
Sponsor:
MAGMA Engineering Asia-Pacific Pte Ltd, Singapore
Speaker:

Devadass Vimalanand, Sr. Application Engineer, MAGMA Engineering Asia-Pacific Pte Ltd

Registration Fee: Individual: 25 US$
Group (5 Pax): 100 US$
Language: English
Time Length: ~60 Min
To Register: Registration Form
[More]
Description: While rubber processing has been a proven industrial method for over 100 years, people are still struggling to design a good mold and develop an optimized process to manufacture high-quality rubber components. It is difficult to predict due to the complex behavior of the material in solid and/or liquid state. To make it possible, SIGMASOFT® Virtual Molding approach provides the realistic performance of the molding process such as thermal behavior of the whole mold that impact the filling and curing processes. While traditional method of simulation provides the simulation result for the specific setting, SIGMASOFT® Autonomous Optimization offers vast number of simulation results and allows us to choose the personal best design. It also offers an opportunity to select the suitable material, optimize the mold design and process, etc. through Design of Experiment (DoE) which identifies the critical factor and leads to ‘first shot successes’ in most applications. This webinar presentation with two case studies will help to understand the capabilities of SIGMASOFT® in term of reducing the cycle time and eliminating the defects in the rubber over-molding process.

Continuous Mixing of Rubber with the RingExtruder
Sponsor:
CPM Extrusion Group, U.S.A.
Speaker:

Dr.-Ing. Michael Erdmann, R&D Manager, CPM Extrusion Group

Registration Fee: Individual: 25 US$
Group (5 Pax): 100 US$
Language: English
Time Length: ~180 Min
To Register: Registration Form
[More]
Description: Continuous mixing for rubber compounds offers significant advantages when compared to conventional batch mixing systems. Extensive efforts over the past two decades have been unsuccessful due to the limited mixing and temperature control capabilities of the equipment, especially at high production rates. This webinar will introduce the RingExtruder RE© and its benefits for these applications. The fundamental machine design and resulting operating characteristics will explain how the limitations of alternative continuous mixing systems can be overcome with the RingExtruder and compounds with outstanding properties can be produced.

Anti-Ozone Wax Application in Rubber & Tire Industries
Sponsor:
Jiangsu Rebo New Material Technology Co., Ltd., China
Speaker:

Tony Huang, Technical Manager

Registration Fee: Individual: 25 US$
Group (5 Pax): 100 US$
Language: English
Time Length: ~60 Min
To Register: Registration Form
[More]
Description: will be updated soon.

Green Rubber Recycling: Tech Innovations & Case Studies
Sponsor:
Shijiazhuang Richway Rubber Technology Co. Ltd., China
Speaker:

Geng Shasha, Overseas Marketing Manger

Registration Fee: Individual: 25 US$
Group (5 Pax): 100 US$
Language: English
Time Length: ~60 Min
To Register: Registration Form
[More]
Description:

Tyre Curing Press : Latest Developments from HF Machinery
Sponsor:
Harburg-Freudenberger Maschinenbau GmbH, Germany
Speaker:

Andreas Stoehrmann, HF TireTech Group, Germany

Registration Fee: Individual: 25 US$
Group (5 Pax) 100 US$
Language: English
Time Length: ~60 Min
To Register: Registration Form
[More]
Description: Curing Presses in targeted benchmarking by the Tire Producer achieved through continuous development. In reference to the 60 years’ experience of engineering and producing Curing Presses, the last 20 years have been a success story for the HF Tire Tech Group. HF was building close to 5.000 curing presses for Domestic Tire Producers and for Global Players. Continued development and innovation of mechanical, hydraulical and electrical (including programming) parts around the core components have been essential for the success. Along with the growing number of produced curing presses HF did invest in modern tool machinery and logistic systems to achieve a high-quality based production for pre-tested curing press. HF Tire Tech developed - high efficient heating and insulation, reliable and reproducible locking and safety systems, transfer units for tire logistic systems, monitoring systems of the consumption as an integral concept to reach the today’s industrial standard

Functional Fillers for Optimum Fluoroelastomer Properties
Sponsor:
DYNAFLUON, India
Speaker:

Mitul Vora, Director, DYNAFLUON

Registration Fee: Individual: 25 US$
Group (5 Pax): 100 US$
Language: English
Time Length: ~60 Min
To Register: Registration Form
[More]
Description: Fluoroelastomers have applications requiring high heat resistance with overall balanced properties. It's wellknown that MT blacks helps in achieves such results. With increasing applications of Fluoroelastomer, there is an increasing demand for colored products. This webinar will focus on achieving and maintaining properties of colored products close to MT Black properties and hence the functional characteristics of coloured Fluoroelastomer Products. This webinar is based on extensive research done by Dynafluon in enhancing functionality of coloured Fluoroelastomer Products.

Application of Environmentally Friendly Accelerators in Rubber Compound Development
Sponsor:
,
Speaker:

Tina Yang, International Sales Manager, Ningbo Actmix Rubber Chemicals Co., Ltd.

Registration Fee: Individual: 25 US$
Group (5 Pax): 100 US$
Language: English
Time Length: ~60 Min
To Register: Registration Form
[More]
Description: Responding to the call of environment protection and energy conservation during economy advance, Actmix researched and developed Environment-friendly rubber accelerator ZDTP-50GE, specially used in EPDM and other diene rubbers. It’s typical of fast curing rate, non-blooming, non-staining, excellent heat resistance, reversion resistance and processing safety, storage stability. It can substitute for DPG-80, and doesn’t form N-Nitrosamine. Till now, Actmix ZDTP-50GE has been used by many famous automotive rubber parts manufacturer to make seals, strips, tire buffer layers etc. We hope to introduce this green product to more and more customers.

Rubber Compounds Quality Improvement with Fine Mesh Straining: State-of-the-Art Technology and Successful Case Studies
Sponsor:
UTH GmbH, Germany
Speaker:

Peter J. Uth, Managing Director, UTH GmbH, Germany
Manuel Beßler, General Sales and Project Manager, UTH GmbH, Germany

Registration Fee: Individual: 25 US$
Group (5 Pax): 100 US$
Language: English
Time Length: ~90 Min
To Register: Registration Form
[More]
Description: Fine-mesh straining of rubber compounds has already established itself in numerous companies as an instrument for improving quality and saving costs. As it’s known, the implementation of such a system in an existing process is generally a highly sensitive step. This webinar will provide an overview of the latest technologies and explain how to achieve the best results by using the most suitable solution for your specific application. Find out more about those industries which successfully rely on proven fine-mesh technology and learn about all the factors that need to be considered. Users will share their practical experience and provide useful tips. Experts from UTH GmbH, who have already successfully implemented hundreds of solutions worldwide and in various industries, will answer your questions.
Speaker:

Understand the Filling and Curing Behavior of Rubber Material to Optimize Cycle Time
Sponsor:
,
Speaker:

Devadass Vimalanand, MAGMA Engineering Asia-Pacific Pte Ltd, Singapore

Registration Fee: FREE
Language: English
Time Length: ~60 Min
To Register: Registration Form
[More]
Description: Design of Experiment (DoE) is used vastly in various stages of injection molding manufacturing method to optimize the mold design, selection of material, molding process, etc. DoE is an effective tool, but it is an expansive tool. It takes lots of time and money to test it practically. Instead of testing the numerous possible combinations of variables in practical way, a virtual DoE will be used in simulation to find out the influencing factors. In this presentation, to obtain good filling behavior and less filling pressure in a door sealing rubber part, a full factorial DoE is used to optimize and select a proper gating position. This presentation will help to understand the capabilities of new simulation approaches in SIGMASOFT® Virtual Molding to optimize the runner systems and cycle time without affecting the quality of the rubber part.